Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow

Tri-colour silk gradient in one spool | Silky lustrous finish | Compatible with 0.4 mm nozzles and above | Print speeds up to 250 mm/s | Supports intelligent filament identification

The Anycubic PLA Silk Tri-colour Filament in Red, Blue, and Yellow is designed for makers who want to elevate decorative prints, fan art, and artistic models beyond single-colour results. Three colours are blended into a single 1 kg spool, producing smooth gradient transitions and a silk-like lustrous finish that shifts visually as the model is rotated. You can fine-tune the surface gloss by adjusting nozzle temperature and print speed — a higher temperature or slower speed increases fluidity and produces a higher-gloss, smoother surface, while cooler or faster settings give a subtler sheen. Compatible with any FDM printer that accepts 1.75 mm filament and a nozzle of 0.4 mm or above, it runs at printing temperatures of 210–240 °C, a heated bed of 55–56 °C, and recommended speeds of 50–250 mm/s. On compatible Anycubic printers the intelligent identification chip is read automatically, streamlining setup without any manual input. A reliable, visually striking choice for decorative and display-quality 3D prints.

Features

• Tri-colour gradient (Red, Blue, Yellow) blended in a single 1 kg spool for layered, multi-tone prints


• Silk-like lustrous finish that shifts appearance with viewing angle


• Adjustable gloss — tune nozzle temperature (210–240 °C) and print speed (50–250 mm/s) to control surface sheen


• Compatible with all 1.75 mm FDM printers using a 0.4 mm or larger nozzle


• Intelligent identification chip for automatic filament recognition on compatible Anycubic printers


• Suited to decorative parts, fan art, figurines, and display models

Specifications

• Colour: Red Blue Yellow (#003594,#F3D03E,#D22630)


• Dry Out Before Use: Recommended


• Drying Condition: 55-65℃, 6-8h


• ACE Compatibility: Compatible


• Nozzle Size: Recommended 0.4 mm or above


• Printing Temperature: 210-240 ℃


• Heated Bed Temperature: 55-56 ℃


• Recommended Printing Speed: 50-250 mm/s


• Maximum Volume Speed (Flow Rate): 8 mm³/s


• Density: 1.22 g/cm³


• Melt Index: 9±1 g/10 min (190℃/2.16kg)


• Melting Point Temperature: 164 ℃


• Vicat Softening Temperature: 54 ℃


• Heat Deflection Temperature (0.45MPa): 53 ℃


• Young’s Modulus: 2000±200 MPa


• Tensile Strength: 37±4 MPa


• Elongation at Break: 28±5%


• Bending Modulus: 2400±160 MPa


• Bending Strength: 66±4 MPa


• lzod lmpact Strength (X-Y): 20±2 kJ/m²


• Tensile Strength (Z): 12±4 MPa


• Filament Type: Aesthetic filaments


• Recommend to Print: Decorative parts, fandom, artworks


• Intelligent Identification: Supported


• Reusable Filament Spool: Supported


• Size: 1KG

What's in the Box

• Anycubic PLA Silk Tri-colour Filament 1kg – Red/Blue/Yellow x1

None Warranty

Our products are covered by a manufacturer’s warranty ranging from 6 months up to a lifetime, subject to the specific item. For detailed warranty information, kindly enquire with our support team.

Reviews

South Africa: 1-3 Days

Free Shipping Over R6000

International: 2-5 Days