Anycubic PLA Silk Dual Filament 1kg – Black/Red

Dual-colour silk luster in one spool | Smooth gradient finish straight off the printer | Compatible with all 1.75 mm FDM printers | Adjustable gloss via nozzle temperature and speed | Designed for decorative prints and artistic models

The Anycubic PLA Silk Dual Filament in Black/Red is designed for makers who want their prints to stand out with a rich, layered visual effect without any post-processing. The dual-colour silk formula blends black and red into a seamless gradient that shifts and catches the light as the model rotates, giving finished pieces a premium, almost metallic sheen. You can fine-tune the surface finish simply by adjusting your nozzle temperature and print speed — a higher temperature or slower speed increases filament fluidity for a high-gloss, silky surface, while cooler, faster settings yield a softer lustre. The filament is compatible with any 1.75 mm FDM printer and works at a printing temperature of 210–240 °C with a heated bed set to 55–56 °C and a recommended print speed of 50–250 mm/s. Dry the spool at 55–65 °C for 6–8 hours before use to ensure clean, consistent extrusion. Ideal for decorative parts, fan art, and artistic models where visual impact matters.

Features

• Dual-colour silk PLA combines Black (#212721) and Red (#D22630) in a single strand for eye-catching gradient prints


• Silk-like surface luster shifts across the colour spectrum as the model is rotated, adding depth and a premium finish


• Controllable gloss — adjust nozzle temperature and print speed to dial in high-gloss or softer lustre results


• Compatible with all 1.75 mm FDM printers; no specialist hardware required


• Supports intelligent identification when used with compatible Anycubic ACE Pro systems for automatic print-parameter recognition


• Certified to RoHS, REACH, and SDS standards


• Recommended for decorative parts, fandom models, and artistic prints

Specifications

• Colour: Black Red (#212721,#D22630)


• Dry Out Before Use: Recommended


• Drying Condition: 55-65℃, 6-8h


• ACE Compatibility: Compatible


• Nozzle Size: Recommended 0.4 mm or above


• Printing Temperature: 210-240 ℃


• Heated Bed Temperature: 55-56 ℃


• Recommended Printing Speed: 50-250 mm/s


• Maximum Volume Speed (Flow Rate): 8 mm³/s


• Density: 1.22 g/cm³


• Melt Index: 9±1 g/10 min (190℃/2.16kg)


• Melting Point Temperature: 164 ℃


• Vicat Softening Temperature: 54 ℃


• Heat Deflection Temperature (0.45MPa): 53 ℃


• Young’s Modulus: 2000±200 MPa


• Tensile Strength: 37±4 MPa


• Elongation at Break: 28±5%


• Bending Modulus: 2400±160 MPa


• Bending Strength: 66±4 MPa


• lzod lmpact Strength (X-Y): 20±2 kJ/m²


• Tensile Strength (Z): 12±4 MPa


• Filament Type: Aesthetic filaments


• Recommend to Print: Decorative parts, fandom, artworks


• Intelligent Identification: Supported


• Reusable Filament Spool: Supported


• Size: 1KG

What's in the Box

• Anycubic PLA Silk Dual Filament 1kg – Black/Red x1

None Warranty

Our products are covered by a manufacturer’s warranty ranging from 6 months up to a lifetime, subject to the specific item. For detailed warranty information, kindly enquire with our support team.

Reviews

South Africa: 1-3 Days

Free Shipping Over R6000

International: 2-5 Days